產品詳情
簡單介紹：
導向式直線活塞桿運動
柔性設計可選用油路塊或螺紋接口連接?ace
低輪廓安裝類型允許缸體在安裝表面以下
活塞桿的內螺紋更易安裝附件?
簡單的在線安裝設備
易于加工的夾具安裝孔，公差要求低
只有3到4個螺栓就可簡單裝配
兩種油口選擇：螺紋連接或油路塊安裝
詳情介紹：
- Chart (Imperial)
- Chart (Metric)
| Cylinder 容量 |
行程 | Model Number |
Cylinder Effective Area |
Oil 容量 |
|||||
|---|---|---|---|---|---|---|---|---|---|
| kN | mm | ? | S/A | D/A | cm2 | cm3 | |||
| pull | push | pull | push | pull | push | ||||
| 2,6 | – | 16,5 | PLSS-22 | ? | – | 0,77 | – | 1,31 | – |
| 5,6 | – | 22,6 | PLSS-52 | ? | – | 1,81 | – | 4,10 | – |
| 13,3 | – | 28,4 | PLSS-121 | ? | – | 4,06 | – | 11,47 | – |
| 2,7 | 5,3 | 16,5 | PLSD-22 | – | ? | 0,77 | 1,55 | 1,31 | 2,62 |
| 6,3 | 13,3 | 22,6 | PLSD-52 | – | ? | 1,81 | 3,81 | 4,10 | 8,69 |
| 11,2 | 28,0 | 22,1 | PLSD-92 | – | ? | 3,16 | 8,06 | 6,88 | 17,7 |
| 14,3 | 27,4 | 28,4 | PLSD-121 | – | ? | 4,06 | 7,94 | 11,47 | 22,94 |
| 43,5 | 81,9 | 30,0 | PLSD-352 | – | ? | 12,39 | 23,74 | 37,20 | 71,28 |
Note: Pull forces for single-acting cylinders reduced to overcome spring force.
| Cylinder Capacity |
Stroke | Model Number |
Cylinder Effective Area |
Oil Capacity |
|||||
|---|---|---|---|---|---|---|---|---|---|
| pound | inch | ? | S/A | D/A | inch2 | inch3 | |||
| pull | push | pull | push | pull | push | ||||
| 1250 | – | 0.89 | PLSS-51 | ? | – | 0.28 | – | 0.25 | – |
| 2950 | – | 1.10 | PLSS-121 | ? | – | 0.63 | – | 0.70 | – |
| 1400 | 2950 | 0.89 | PLSD-51 | – | ? | 0.28 | 0.59 | 0.25 | 0.53 |
| 2475 | 6300 | 0.86 | PLSD-92 | – | ? | 0.49 | 1.25 | 0.42 | 1.08 |
| 3150 | 6150 | 1.10 | PLSD-121 | – | ? | 0.63 | 1.23 | 0.70 | 1.40 |
| 9600 | 18,400 | 1.20 | PLSD-351 | – | ? | 1.92 | 3.68 | 2.27 | 4.35 |
Note: Pull forces for single-acting cylinders reduced to overcome spring force.
